Application Example Bonding
Adhesive Dispensing for Industrial Design
Bonding is also referred to as structural bonding with a dispenser. With volumetric adhesive dosing, almost all material combinations are bonded. The adhesive dispensers from preeflow guarantee a reliable and stable process. Absolute precision and accuracy make the adhesive dispensing systems the ideal application partner.
Minimum Adjustment for Maximum Success
A daily problem for the engineers at BBraun: time-consuming replacement of the clogged dosing needles at the end of production. It was too much effort. An alternative solution had to be found. The manufacturer of medical technology and pharmaceutical products turned to Supratec Syneo, preeflow’s sales partner in France. The idea: in future, a UV-curing adhesive should be applied with the high-precision dispensers from preeflow.
BBraun implemented the UV-curing adhesive. And it was a success: since the adhesive only cures when it comes into contact with UV light, time-consuming cleaning steps were no longer necessary.
A small adjustment with significant consequences: the precise adhesive dispensing systems from preeflow and the new adhesive proved to be an unbeatable combination: precise, clean and economical.
preeflow Bonding advantages:
- Adhesive bonding of a wide variety of material combinations
- Replacement of processes such as riveting and welding
- Use in industrial design and manufacturing
“The adhesive can be used flexibly. We are therefore very satisfied and are planning further projects.”Xavier Nouaille-Degorce, Projektleiter BBraunTo the detailed report
Product tests and validation by preeflow
Help with the selection of dosing components and small dosing systems
Combination of complete dosing systems or dosing equipment
Publication of all tested materials with manufacturer’s approval
Test your products and applications via video conferencing
The 1-component dispenser: Your perfect partner for low to high viscosity dispensing.
The 2-component dispenser: Simple and precise dosing of previously unattained small quantities with dosing systems.
The spray dispenser: Perfect spraying of fluids in the low to high viscosity spray range.
preeflow® – microdispensing in perfection
More than 20 years’ experience in fluid dosing. ViscoTec distinguishes itself with its comprehensive know-how in dispensing technology. In 2008, this wealth of experience was expanded with the introduction of the preeflow brand. With success: For 10 years, preeflow has stood for precise and purely volumetric dispensing of fluids in small and very small quantities. All over the world, a wide variety of industries rely on preeflow products. Always following our philosophy: Smaller, more precise, economical.